Boba Fett Prototype - DIY Kit (Raw 3D Print)
Boba Fett Prototype - DIY Kit (Raw 3D Print)
Boba Fett Prototype - DIY Kit (Raw 3D Print)
Boba Fett Prototype - DIY Kit (Raw 3D Print)
Boba Fett Prototype - DIY Kit (Raw 3D Print)
Boba Fett Prototype - DIY Kit (Raw 3D Print)
Boba Fett Prototype - DIY Kit (Raw 3D Print)
Boba Fett Prototype - DIY Kit (Raw 3D Print)
Boba Fett Prototype - DIY Kit (Raw 3D Print)
Boba Fett Prototype - DIY Kit (Raw 3D Print)
  • Load image into Gallery viewer, Boba Fett Prototype - DIY Kit (Raw 3D Print)
  • Load image into Gallery viewer, Boba Fett Prototype - DIY Kit (Raw 3D Print)
  • Load image into Gallery viewer, Boba Fett Prototype - DIY Kit (Raw 3D Print)
  • Load image into Gallery viewer, Boba Fett Prototype - DIY Kit (Raw 3D Print)
  • Load image into Gallery viewer, Boba Fett Prototype - DIY Kit (Raw 3D Print)
  • Load image into Gallery viewer, Boba Fett Prototype - DIY Kit (Raw 3D Print)
  • Load image into Gallery viewer, Boba Fett Prototype - DIY Kit (Raw 3D Print)
  • Load image into Gallery viewer, Boba Fett Prototype - DIY Kit (Raw 3D Print)
  • Load image into Gallery viewer, Boba Fett Prototype - DIY Kit (Raw 3D Print)
  • Load image into Gallery viewer, Boba Fett Prototype - DIY Kit (Raw 3D Print)

Boba Fett Prototype - DIY Kit (Raw 3D Print)

Regular price
£160.00
Sale price
£160.00
Regular price
Sold out
Unit price
per 

🚚 FREE Worldwide Shipping on orders over £75

Shipping calculated at checkout.

Boba Fett Prototype Helmet DIY Kit

Here we have the awesome Boba Fett Prototype Helmet. It is identical to the standard Boba Fett helmet sans the famous dent. This helmet has been meticulously designed from scratch to be as accurate as possible to the movie prototype, as well as logistically simple to print, assemble and paint.

You can use 2 x (4mm diameter x 1mm thick) N42 Neodymium Magnets for the rangefinder to keep it at upright or lowered position. The right ear mechanism all snaps into place but we would recommend glue.

The Rangefinder Head has been designed to fit the Electronic Circuit Board by Westaby Electronics on Etsy.

*Please note - This is a DIY kit. Some pictures show what is possible to make on your own from this kit. The parts will need assembling, filling, sanding and painting and the fun is all in the build! Actual items received are the following raw 3D Printed parts:

• Main helmet

• Left Ear

• Right ear Inner

• Right ear Outer

• Right ear Lower

• RF Stalk

• RF Head Hollow

• RF Head Solid

• RF Acrylic

• RF Camera

• Borden Connector

• Back Grill

We're very proud of this helmet!

OPTIONAL EXTRAS

 NOW WITH VISOR INCLUDED! + £12.00

Circuitboard made by Westaby Electronics with 2 x Red flashing LED’s and 1 x White LED. Runs on a CR2032 watch battery (Not included). Rangefinder lights are required for 501st Approval.

SIZING

This helmet fits most adult male heads. If you believe you have a head larger than the average UK male of 57.2 cm circumference (measured at the brow), then please add a note to your order or message us on Facebook and we can make arrangements to print larger.

HOW LONG?

Orders are printed on demand. We usually dispatch within 1-2 weeks. However depending on volume or print failures it can take 1-4 weeks so please bare with us.

More Info

• This is not an official licensed product and is considered ‘Fan Art’.

• Buyers are responsible for any Customs and import taxes

• Due to the custom nature of the work, print and dispatch times may vary and are estimates only.

• Shipping delays can happen. Please understand that we cannot control everything but try our best to get your order to you as fast as possible.