RGB S10 / RGB S16 Lightsaber Instructions

Specification

  • Hilt Material: Aluminium Alloy 6063
  • Blade Material: Spotlight Polycarbonate
  • LED: RGB 12W
  • Speaker: 8 Ω, 2 W
  • Battery: 18650, 2000 mAh
  • Blade Size: 82 cm / 92 cm
  • Operating Time: approx. 4 hours
  • Charging Time: approx. 2 hours
  • Sound Fonts: 10–16 sets (Luke, Obi-Wan, Vader, Anakin, Maul, Ahsoka, Cal, Yoda, Kylo, SK, etc.)
  • Blade Colours: 12 (Red, Blue, Yellow, Cyan, Ice Blue, Green, Pink, Orange, Purple, Peak Green, Rose, White)
  • Blade Effects: 4 (Ghost, Stable, Blaster, Pulse)
  • Included in Box:
    • Hilt ×1
    • Blade ×1
    • Tool Kit ×1
    • Charging Cord ×1
    • Manual ×1

You will hear a prompt tone when the battery is installed correctly or when charging is in progress.

One Button Operation

Standby Mode (button light on, blade off)

  • Wake Up: Hold the button until the light turns on.
  • Turn On: Press the button once.
  • Adjust Volume (3 levels): Hold until the light flashes once, then release.
  • Switch Sound Fonts: Hold until the light flashes twice, then release.
  • Switch Background Music (S16 only): Hold until the light flashes three times, then release.
  • FOC (Flash on Clash) On/Off: Hold until the light flashes four times, then release.
  • Power Saving Mode: Hold until the button light turns off (auto after 10 minutes of inactivity).

Power On (button light and blade on)

  • Blaster Effect: Quick press.
  • Lock-Up: Hold until the light flashes once, then release.
  • Colour Change: Hold until the light flashes twice, then release → tap button to cycle colours.
    • To exit: hold until the light flashes once, then release.
  • Turn Off: Hold until the light flashes four times, then release.

One Button Gesture Operation

Standby Mode

  • Turn On: Twist the hilt.
  • Switch Sound Fonts: Point blade upwards, hold button, twist hilt.
  • Switch Background Music (S16 only): Point blade downwards, hold button, twist hilt.

Power On

  • Turn Off: Twist the hilt.
  • Switch Blade Effects: Point blade upwards, hold button, twist hilt.
  • Colour Change: Point blade downwards, hold button, twist hilt.
  • FOC: Strike the blade.

Two Button Operation (PWR + AUX)

Standby Mode

  • Power On: Tap the PWR button.
  • Switch Sound Fonts: Tap the AUX button.
  • Adjust Volume: Hold PWR button → cycles through Mute / Low / High.
  • Power Saving Mode: Auto after 20 minutes of inactivity.

Power On

  • Turn Off: Tap the PWR button.
  • Blaster Effect: Tap the AUX button.
  • Lock-Up: Hold AUX button, then release.
  • FOC On/Off: Hold PWR button, then release.

Two Button Gesture Operation

Standby Mode

  • Turn On: Twist the hilt.
  • Switch Sound Fonts: Point blade upwards, hold AUX, twist hilt.
  • Switch Background Music: Point blade downwards, hold AUX, twist hilt.

Power On

  • Turn Off: Twist the hilt.
  • Switch Blade Effects: Point blade upwards, hold AUX, twist hilt.
  • Colour Change: Point blade downwards, hold AUX, twist hilt.
  • FOC: Strike the blade.

Frequently Asked Questions (FAQs)

Q: What is the difference between the S10 and S16?
A: Both operate similarly, but the S16 includes background music options.

Q: How many sound fonts are included?
A: The lightsaber comes with 10–16 pre-installed sound fonts depending on model.

Q: How do I change the blade colour?
A: Enter colour-change mode (see button or gesture instructions) and cycle through the 12 available colours.

Q: Can I turn off Flash on Clash (FOC)?
A: Yes, hold the relevant button sequence (see above) to toggle FOC on/off.

Q: How long does the battery last?
A: Around 4 hours of use on a full charge.